Onlyone Multifunction Sanitizing, anti-algae, floculant, blue for pools 200 g tablets Package of 10kg

Multifunction in 200g tablets, with a chlorinating action (hygienizing) and, at the same time, anti-algae and flocculant, with slow dissolution.

Do not disperse directly in the tank but put them in the lambing or floating dosers, in the fixed skimmer or in a chlorine diffuser, then put the filtration device in operation to allow the product to dissolve when the water circulates through the skimmers.
Applying it to the pool water, bacteria, viruses and micro-organisms are eliminated in general, the formation of algae is avoided and the water is kept clear and crystalline and, with continuous use, also guarantees perfect clarification.
 
ADVICE ON USE
Pay particular attention to the use of the product with tanks equipped with PVC liner: never exceed the doses recommended by the pool manufacturer.

- Initial treatment; as for the dosage, initially add 15 g of granular dichloro per m³ of water.
After two hours, adjust the pH level of the water to reach a value between 7.2 and 7.6 and the residual chlorine between 0.5 and 1.2 mg / l with specific products.
- Maintenance treatment; once the pH level is correct, add a 200 g tablet for 15 m³ of water every 7 or 10 days. The needs vary according to the water temperatures, light intensity, the number of bathers and the amount of oxidizing material present.
Repeat the initial treatment whenever you notice that the water is less transparent.

The entire volume of the pool water must be recirculated through the device every day.
These dosages are simply recommended, they may be susceptible to changes depending on the particular characteristics of each pool and the climate.
It is advisable to introduce the chemical product in the evening and always in the absence of bathers.

For quantities special prices.